QuickFreedom

Untether Jailbreak your iPod Touch 2G!!

Wednesday, April 15, 2009

FAQ

If you are having trouble using QuickFreedom Please find your question below and it may help you.

1) I keep getting an 'Error Creating Firmware' everytime I try making it.
  • Try running the program as an admin (Right click on QuickFreedom and select Run as Administrator)
  • Make sure you are logged onto windows as an Administrator
  • Reinstall QuickFreedom and try the above procedures again

2) I'm getting the blue screen of death and/or my usb ports and drivers are not working properly.

  • LibUsb must be installed in compatiblity mode for windows xp sp2. If you forgot to do this or it did not work properly. Restart your computer and press F8 during boot and select Safe Mode. Uninstalling LIBUSB or doing a system restore to a time before LibUsb will fix all your driver issues.
  • LibUsb is known to mess up your drivers so be careful about doing so.

3) Im getting error 6 in iTunes while restoring

  • Problem is with your boot logo most likely. Make sure you meet all requirments for creating your own custom boot logo found in the help file in QuickFreedom.

4) I can't find the Custom Firmware file on my desktop!!

  • Did you click Create Firmware in QuickFreedom during Step 2?

5) I downloaded the original 2.2.1 firmware, however it shows a bunch of files.

  • When you download the Original 2.2.1 firmware do NOT extract it. It should have an extention ending with .ipsw

6) I am unable to enter dfu mode or my computer does not recognize it.

  • To enter DFU mode, click here for a tutorial.
  • If you get an USB device not recognized, uninstall LIBUSB and reinstall iTunes (will not delete any music or anything)
7) I'm getting "Error 13" in iTunes
  • This problem is related to USB. Turn Off your ipod and unplug it. Replug the device and turn it on and place in the correct mode (DFU or Recovery). If this does not work reinstall iTunes/LibUsb
8) I keep getting "Error 1604 or 16xx in iTunes"
First of all this problem can sometimes be fixed if you restore to your original 2.2.1 firmware. If that fails then an entry through iRecovery needs to be changed so Auto-Boot = True. To do this follow this tutorial here.

Thanks for everyone who used QuickFreedom to jailbreak their ipod!

If you are still having problems please send your log.txt and your problem to dan@ipod2g.info

posted by Dan @ 4:49 PM  

123 Comments:

  • At April 16, 2009 10:38 PM , Blogger Boring... said...

    Is it ok to delete QuickFreedom after i jailbreak? Beacause it takes up 600 mb of my 16.5 mb in my computer (yes my computer is crappy).

     

  • At April 17, 2009 5:43 AM , Blogger lukas said...

    This post has been removed by the author.

     

  • At April 17, 2009 2:54 PM , Blogger Dan said...

    Yes you can delete it and all the old ipsw and uninstall LibUsb, just reinstall when needed :)

     

  • At April 17, 2009 3:50 PM , Blogger Nightmare said...

    I get error 13 when restoring my ipod

     

  • At April 17, 2009 5:03 PM , Blogger lukas said...

    if got a problem but i think i did everything right:
    (connected the ipod with the pc via itunes)
    in step 1 :
    1. installt libusb with Qfreedom
    2. downloaded 2.2.1 fimeware with Qfreedom
    3. quickfreedom copied it
    in step2:
    1. ticked installinstaller
    2. ticked use custom logos (changed it)
    then i klick on create fimeware log box says:
    [12:34:32] Select options above and click Create Firmware
    [12:37:40] Starting Firmware Creation - Created by Dancool999, credit to planetbeing for xPwn
    [12:37:40] This process may take 5-10 minutes to complete.
    [12:37:41] Starting firmware creation...

    problem is that you will wait forever nothing happens yust "please wait..."
    i waited 3 houers nothing happend

    does anyone see the problem?
    [winxp sp3, ipod touch 2g fw 2.2.1]
    mfg kuntekinte
    (sorry for my bad english hope you got it)

     

  • At April 17, 2009 10:04 PM , Blogger José Antonio said...

    I have a problem...

    When one starts creating the firmware, a mistake appears saying that it cannot create the firmware.

     

  • At April 17, 2009 10:05 PM , Blogger José Antonio said...

    I have a problem...

    When one starts creating the firmware, a mistake appears saying that it cannot create the firmware.

     

  • At April 17, 2009 11:35 PM , Blogger Dan said...

    Run the Program as an Admin.

     

  • At April 18, 2009 2:32 AM , Blogger lukas said...

    i m using winxp i m always admin i really dont the whats wrong...

     

  • At April 18, 2009 7:17 AM , Blogger Tuan said...

    I have a problem when restore.It said "The ipod "Ipod" could not be restored.An unknown error occured(1604)"

     

  • At April 18, 2009 1:40 PM , OpenID Lindsay said...

    I have the same problem as Tuan. I've tried restoring my 2g 16gb ipod touch probably about 20 times in the past few days. I used the newest version, 1.2, for my windows xp. My ipod has been in recovery mode, and I can't get it out of recovery mode, so I try to restore it, but I always get error 1604. I tried using the older version of quickfreedom, different custom firmwares, restarted my computer, used a different usb, but nothing's worked. I just uninstalled and re-installed itunes & quicktime onto my computer, then tried restoring, but I got an error 1603 this time. Please help! :-/

     

  • At April 19, 2009 4:26 AM , Blogger Kenny said...

    after i had installed the libusb, my computer didn't exept any hardware (my usb-mouse, my bioprotector). i had to restore my pc, because nothing had worked any more.

     

  • At April 19, 2009 7:10 AM , Blogger Will said...

    i cant find the 2.2.1 firmware where will it be?

     

  • At April 19, 2009 1:39 PM , Blogger Dan said...

    Will you need to download it.

     

  • At April 21, 2009 7:55 PM , Blogger TeUnion said...

    lukas restart your computer. if that doesn't work try reinstalling quick freedom

     

  • At April 21, 2009 11:07 PM , OpenID airdconditioning said...

    itunes won't let me sync my jailbroken ipod touch. what should i do?

     

  • At April 22, 2009 2:14 PM , Blogger lukas said...

    @teunioni reinstlled ist 3 times or so and restarted my computer that dosnot help sorry

    anyone can halp me?
    my problem is up there

     

  • At April 22, 2009 10:27 PM , Blogger lucas said...

    i have same problem as lukas and i need help

     

  • At April 23, 2009 2:58 AM , Blogger lioric said...

    i jailbroke my ipod touch 2g

    but none of my cydia apps icons are on the springboard even winterboard

    plz help

     

  • At April 23, 2009 7:32 PM , Blogger fabiola said...

    i have a problem when i press the start firmware button it tells me error creating firmware! please help me

     

  • At April 23, 2009 10:29 PM , OpenID joshi91 said...

    what do i do once i have jailbroken my ipod?

     

  • At April 25, 2009 5:52 AM , OpenID negruv1 said...

    Used NoCydia version. When creating firmware-
    [13:47:52] Error! Make sure Cydia.tar is located in: C:\Program Files\QuickFreedom\Files\XPwn\bundles

     

  • At April 25, 2009 3:08 PM , Blogger Александр said...

    I have the same problem as negruv1.
    I tried to use quickfreedom on windows vista SP1 and on WinXP, but results are the same:

    Error! Make sure Cydia.tar is located in: C:\Program Files\QuickFreedom\Files\XPwn\bundle

     

  • At April 25, 2009 4:38 PM , Blogger A said...

    i have a problem where i put the unit in DFU and then try to click on start pre-jailbreak but i get a popup that the action cannot be completed because the other application is busy and the switchto or retry do nothing....thanks in advance for any help.

     

  • At April 26, 2009 11:04 AM , OpenID baseballboy508 said...

    If i jailbreak my ipod on one computer, can i sync it with itunes on a different computer?

     

  • At April 26, 2009 3:42 PM , Blogger Roberto said...

    I have the same 1604 error, while I'm installing the custom firmware too. I had to restore 2-3 times my ipod because of this damn 1604 error!! No one has an explanation, or better, a solution?

     

  • At April 29, 2009 6:00 PM , Blogger Spedione said...

    When you go to restore, do you put it into DFU mode and click the button that says, "Start Pre-Jailbreak", in Step 3?

     

  • At April 29, 2009 10:24 PM , OpenID oldmanmidget said...

    hey dan, the only problem i had was getting to i tunes after my screen turned white. i couldnt open i tunes to put in my custom firmware. how can i open my itunes again?

     

  • At April 29, 2009 11:56 PM , Blogger Proffessional Does Come Cheap! said...

    Hey I installed LIBUSB, Quickfreedom says it is not installed and when I try to go to Start Pre-Jailbreak after entering DFU mode I get "Please connect your iPod in DFU mode. If you need help, ..." I tried uninstalling LIBUSB, re-installing iTunes as recommended and re-installing LIBUSB to no avail. I am on Vista and I did install it in XP SP2 compat mode.

    Note that the LIBUSB test screen after install shows my iPod as:

    bus/device idVendor/idProduct
    bus-0/\\.\libusb0-0003--0x05ac-0x1227 05AC/1227
    - Manufacturer : Apple Inc.
    - Product : Apple Mobile Device (DFU Mode)
    - Unable to fetch serial number string
    wTotalLength: 25
    bNumInterfaces: 1
    bConfigurationValue: 1
    iConfiguration: 0
    bmAttributes: 80h
    MaxPower: 50
    bInterfaceNumber: 0
    bAlternateSetting: 0
    bNumEndpoints: 0
    bInterfaceClass: 254
    bInterfaceSubClass: 1
    bInterfaceProtocol: 2
    iInterface: 0

    Let me know what's up! Thanks

     

  • At April 30, 2009 1:25 AM , Blogger Proffessional Does Come Cheap! said...

    nvm I got it to work. Selected "do not check for LIBUSB" under Advanced menu :)

     

  • At April 30, 2009 1:41 AM , Blogger wackywinners said...

    i know everyone says this is only for the 2nd gen ipod touches but ive got a 1st gen with 2.2.1 software wich wont work on quickpown and wont work on this as it says ipod not connected! in the bottom corner any help?

     

  • At April 30, 2009 8:03 AM , Blogger Roberto said...

    Yes, i put iPod in DFU Mode, then I start pre-jailbeak, the screen becomes white...then when I restore...error 1604.
    I also tried changing USB port, but the problem remained

     

  • At May 1, 2009 10:20 AM , Blogger BolsterStore said...

    hi, ive jailbreak, but yet. I cant get into any wifi connection ?

     

  • At May 1, 2009 2:59 PM , Blogger dominic said...

    i cannot create my custom firmware because it stays stuck at 1% i also tryed to run as administrator. did not work.

     

  • At May 2, 2009 9:07 AM , Blogger Silviu said...

    I have redsnow tethered installed 2.2.1 can i just do it overwrite it with this nicer version? or will it delete all media from the touch?

     

  • At May 2, 2009 10:04 AM , OpenID lizzy said...

    i cant find winterboard anywhere

     

  • At May 2, 2009 7:26 PM , Blogger Ura said...

    I am on 64-bit Windows 7 (which is almost exactly like Vista, all software and etc are same) and after I installed the BATCH file and restarted my USB hubs stopped working, I uninstalled it and rebooted again, still nothing....
    HELP PLEASE!!!

     

  • At May 4, 2009 1:34 PM , Blogger jackhepp said...

    you guys.... are the greatest people on the earth much smarter than bill gates!

     

  • At May 4, 2009 7:47 PM , Blogger Michael said...

    hi ummm i downloaded everything and followed everything and i got my ipod jailbroken but now what do i do? i can't find cydia and i dont konw how to download free paid games... help is very apreciated thank you!

     

  • At May 5, 2009 12:21 AM , Blogger tpambau said...

    I THINK IT MUST BE NOTIFIED, THAT LIBUSB IS EXTREMELY BUGGY SOFTWARE AND EVERY USER MUST BUY PS/2 MOUSE AND KEYBOARD BEFORE INSTALLATION! AFTER I INSTALLED LIBUSB MOUSE+KEYBOARD(logitech cordless desktop) as well as sound card and network card refused to work (OS Vista32)

     

  • At May 5, 2009 10:05 PM , Blogger Sam said...

    when i put my Ipod in DFU mode and click start pre jail break... my Ipod screen doesn't turn white! I've tried everything! Please help!!!!

     

  • At May 6, 2009 4:55 AM , OpenID Kat said...

    When I try to create firmware it gets stuck in 'Starting firmware creation'. For like.. hours. How can I fix this?

     

  • At May 7, 2009 1:34 PM , Blogger Ali Thanawalla said...

    Using Windows XP....it says error creating custom firmware...i tried re downloading a fresh copy of the firmware,reinstalling everything....but nothing!
    Help guys....this is driving me crazy :@

     

  • At May 7, 2009 9:18 PM , Blogger sebby said...

    wtf why cant i download installes wtf there is an error when i down load the cydia,hackulo.us/ wtf it downt work please tell me what i can do at sebby_soccer.hit@hotmail.com and the error was #1 kk ttyl

     

  • At May 9, 2009 11:14 AM , OpenID daviddahomie said...

    WTF IT WONT TURN ON CUS ITS FROZEN

     

  • At May 9, 2009 5:30 PM , OpenID mi5stargamer said...

    ERROR 6???

     

  • At May 10, 2009 12:18 PM , OpenID siciliani23 said...

    i have my custome firmware on my desktop but when i go into itunes press shift+restore and i click my custome firmware a error code (2005) pops up whats wrong

     

  • At May 10, 2009 12:20 PM , OpenID siciliani23 said...

    i have my custome firmware on my desk top but when i go into itunes click shift+restore find my firmware i get an error code (2005) whats wrong

     

  • At May 10, 2009 6:09 PM , Blogger Mohammed said...

    Hi, I have jailbreaked my I pod using QuickFreedom 1.2. It's successfull too. But Still I'm not able to install third party softwares to my iPod but, I can see Cydia installed and working well. When I try to install third part softwares it says "it could not be verify". can you help me to get a solution.

     

  • At May 11, 2009 2:06 PM , Blogger amal0007 said...

    this sucks -.- this software doesn't work and quickpwn cant jailbreak 2g yet F**K this S**T

     

  • At May 11, 2009 10:46 PM , Blogger Mishonio said...

    Great software. Used it on my iPod Touch 2G and worked like a charm. Thx.

    I have a related "can it be done" question. The HOME button on one of my older, not-jailbroken iPods (1G) stopped working. This appears to be due to a hardware issue.

    My Question: Is it possible to jailbreak this older iPod Touch 1G with QF or other products, considering that its HOME button doesn't work at all? As a result the iPod can't be placed in DFU mode.

    I am hoping there will be a way to workadound the issue and place the phone in DFU mode somehow, so it can be jailbroken.

    Please help.

    Thanks,
    Michael

    P.S. The reason I want to jailbreak so I can install several utilities available via Cydia which will allow me to use the battery icon as a Home button

     

  • At May 12, 2009 9:53 PM , Blogger Vignesh said...

    will a restore on Itunes completely erase all traces of jailbreaking???
    And are there any risks to your Ipod when using QuickFreedom???

     

  • At May 15, 2009 3:10 PM , OpenID Josh said...

    i keep getting error patching files

     

  • At May 15, 2009 4:24 PM , OpenID e102badass said...

    When i start to restore with the custom frimware
    its saying {the ipod "ipod" could not be restored.an unknown error occurred (1604)} can any 1 help me??

     

  • At May 16, 2009 6:41 PM , Blogger Nathan Ringo said...

    It says "Error patching File!"!

    HELP

     

  • At May 17, 2009 1:56 PM , OpenID peda4444 said...

    i have to same problem as question number 1 and i followed the steps and it still doesn't work?

     

  • At May 17, 2009 2:54 PM , OpenID Rocknrun18 said...

    what is the use for libusb? i installed it wrong twice, then did it correctly the third time. (i have os vista). obviously it screwed up my usb ports the first two times and gave me the blue screen of death but the third time i got it right. i jailbroke my ipod but my computer still gave me the blue screen and wouldnt shut down. finally today i uninstalled libusb and my computer shut down fine. i wanna know y u have to install it and y this was happening to me.

     

  • At May 18, 2009 5:07 PM , Blogger CORESA said...

    For those stuck in the Starting firmware creation, just go to the '\QuickFreedom\Files\XPwn' dir and execute a bat file that is created temporally. That worked for me. Sorry for my bad english.

     

  • At May 21, 2009 7:58 PM , Blogger * Zack * said...

    i can't create the firmware and i am on the admin account ive waited for over 10 mins aswell but it does not go past like a mm of the load bar and when my cursor goes over the window it turns into the hourglass

     

  • At May 21, 2009 8:02 PM , Blogger * Zack * said...

    how do u execute a bat file cuz i can't get the custom firmware create to work im on admin and have waited for over 10mins still nothing loaded

     

  • At May 21, 2009 9:26 PM , Blogger Jaden said...

    This post has been removed by the author.

     

  • At May 21, 2009 9:29 PM , Blogger Jaden said...

    This post has been removed by the author.

     

  • At May 22, 2009 1:58 PM , Blogger gizmold said...

    hi, like everyone here i have a question, ive jailbreak my ipod succesfully, ive download mipatch firm 2.2.1, i can manage to install crack app and sync with itune, but when i try to run it with my ipod, it show me an error message, "the application <...> cannot be openned" did i need an extra patch or if i did something wrong during the jailbreaking part...

    if you could give me an anwser i would be very happy, i spent the last 3 days looking to fixe my problem.
    thx

     

  • At May 22, 2009 2:02 PM , Blogger gizmold said...

    hi, ive have a question for you like everyone here...

    ive jailbreak my ipod 2g with Quickfreedom, ive download mipatch firm 2.2.1, everything went well and i can sync my crack games with itune, but when i try to load by clicking on the icon in my ipod, it show me an error message "the application <...> canot be opened"

    did i need an extra patch or did i do something wrong during the jailbreak part?

    if you have any anwser for me i would be very happy, i spent the last 3 days trying figure it out what i did wrong.

    thx alot

     

  • At May 23, 2009 3:46 PM , Blogger Stacie said...

    do you get viruses?

     

  • At May 24, 2009 1:34 PM , OpenID Leelee6990 said...

    I tried clicking the part where it says download for the 2.2.1 firmware and it isn't doing anything.

     

  • At May 24, 2009 2:01 PM , Blogger Sam said...

    i have a iPod touch 1g and when I get the iPod into DFU mode and click start pre-jail break, my iPod screen does NOT turn white like it says it's supposed to. I have tried it over and over again and it still doesn't work...
    Can anyone help me?

     

  • At May 26, 2009 1:13 PM , Blogger aqua turtle said...

    I have the iPod touch 2g and when I try to downloxe it it says safari can't download so can anyone help me I have been trying to do this for almost 2 months now

     

  • At May 26, 2009 6:34 PM , OpenID awsomeryanx886 said...

    ok i really need help when i am in dfu mode and i hit pre jailreak the screen never turned white

     

  • At May 28, 2009 6:14 PM , OpenID Rn4lfe420 said...

    Is there a way to download QuickTime back on my iPod 2g after I jailbroke it and added the custom firmware????? Please help

     

  • At May 28, 2009 11:01 PM , Blogger 호성 said...

    I can't find the 2.2.1 firmware even when i donwloaded it

     

  • At June 1, 2009 8:34 PM , OpenID blair0416 said...

    i get problem with DFU Mode i put it but whaen i am about to but pre-jailbreak it say that if my ipod it not white to unploge an reploge and still does not work can u help me

     

  • At June 5, 2009 10:39 AM , Blogger SR.DJ. said...

    Problem:
    Both the LibUSB and QuickFreedom recognise that the Ipod 2G is in recovery mode. However, when I click Pre-Jailbreak button I get a message "Pleace connect your Ipod in DFU mode"
    I have restarted my computer, reinstalled iTunes. I have WIn XP SP2

     

  • At June 7, 2009 9:26 AM , Blogger nickster1994 said...

    my ipod is completely jailbroken. my problem is when i want to download things from cydia i get http unknown http error: -2096. i can't seem to find out why its doing it. it worked fine the first day

     

  • At June 8, 2009 11:59 AM , Blogger Alex said...

    does this work with itunes 8.2?

     

  • At June 8, 2009 1:25 PM , OpenID hallabisha said...

    I keep getting error 13 when i go to restore to the custom firmware. I've tried everything, re-installing itunes, re-installing libusb. But it doesn't seem to work. Everything goes the way it should but i get error 13.. WHY? PLEASE HELP!

     

  • At June 9, 2009 7:50 PM , Blogger Kevin said...

    Do u jbreak using a computer or ur touch. If u are sappose to use ur touch mine says safari can not download! Help!

     

  • At June 9, 2009 11:44 PM , Blogger vanessa said...

    This post has been removed by the author.

     

  • At June 9, 2009 11:46 PM , Blogger vanessa said...

    I have the same problem with Sam. The screen doesn't turn white. and its asking to unplugging/replugging. and it stops there..
    Can anyone help?

     

  • At June 12, 2009 9:54 AM , Blogger baidir95 said...

    Itried to download the original 2.2.1 firmware with quickfreedom 1.2 but when i click on the button to download it,it doesn't start downloading.

    What do i have to do?

     

  • At June 13, 2009 10:29 AM , Blogger ronnie said...

    i have a very simple problem every thing is good except it say it is not connected???????? wtf man it is charging and every thing??????

     

  • At June 13, 2009 10:32 AM , Blogger ronnie said...

    i had it pluged in before i opened it up (quickfreedom)

     

  • At June 13, 2009 2:30 PM , Blogger sally said...

    im at the bit where you have to hold 'shift' and click 'restore' then select' Custom Firmware, but when i do that it says, 'The iPod, 'iPod' could not be restored because the firmware file is not compatible'. arrg!? what shall i do? x

     

  • At June 13, 2009 2:40 PM , Blogger sallyyy said...

    im at the bit where you have to hold 'shift' and click 'restore' then select' Custom Firmware, but when i do that it says, 'The iPod, 'iPod' could not be restored because the firmware file is not compatible'. arrg!? what shall i do?

     

  • At June 14, 2009 10:57 PM , OpenID DaSpurTitan said...

    I hacked my ipod, but whats the point? the cydia free games are lame. IS there anyway of getting games from the App store for free?

     

  • At June 17, 2009 9:52 AM , Blogger George van der said...

    When (at step 3) quickfreedom is busy, My Ipod justs reboot like it normaly does. quickfreedom says my ipod is conected in normal mode an that if my screen isn't white i should diconect my ipod and reconect. but this only starts the syncronation of my Ipod again.
    Am i doing something wrong?

     

  • At June 17, 2009 1:26 PM , Blogger Jenny said...

    Hi... I want to jailbreak my ipod and it has the 2.2.1 (5H11a)firmware and the quickfreedom program says that i dont have it... it says: ORIGINAL 2.2.1 FIRMWARE- NOT FUND... please HEEEEEEEEEEELP!!!!... my e mail is: jnny37@hotmail.com

     

  • At June 17, 2009 4:42 PM , Blogger Roy said...

    Hi, this isn't really about the subject, but i was wondering if you could do the same wonderful job you did on the iTouch 2g on the new iPhone OS 3.
    Thank you very much.

     

  • At June 18, 2009 5:02 AM , Blogger Alejandro said...

    Yo también me estoy haciendo la misma pregunta que Roy, ojalá pueda hacer de nuevo el Jailbreak a mi iPod Touch 2G con el nuevo OS 3.0!!

    Un saludo desde España!! :D

     

  • At June 18, 2009 11:16 AM , Blogger Elio said...

    Jenny: i have that problem too, i pressed download and nothing happened, just press download again until it is saved on your comp.

    DaSpurTitan: The best point of having a ipod jailfree is to put funcional cracked apps in the ipod, just google it

     

  • At June 18, 2009 5:50 PM , OpenID bgeezy421 said...

    all of you having problems jailbreaking a 1g ipod touch using quickfreedom stop trying to use it, it only works for the 2g I know because I jailbroke my own ipod 2g using this then tried my roommates 1g and it did not work so I used quickpwn to do his ipod. Just download quickpwn and use that instead it works for 2.2.1 but not the 2g

     

  • At June 19, 2009 1:13 PM , Blogger Wayfarer said...

    Hey, I was hoping you could update the software to install 3.0, now that it is out. Perhaps an update would be nice to at least tell us your intentions, if you are going to do that. Otherwise, we can go bug some other people...

     

  • At June 20, 2009 1:13 AM , Blogger simple said...

    hey what about OS 3.0? :-)

     

  • At June 20, 2009 6:54 PM , Blogger icy-infinity said...

    Yes please update us if there will be a 3.0 version of Quickfreedom and what kinda time frames we could expect for a release, thankies

     

  • At June 22, 2009 11:55 AM , OpenID bulldogsms52 said...

    i'm getting a (2005) error code. Any clue as to a fix?

     

  • At June 22, 2009 9:32 PM , Blogger Austin said...

    is Quickfreedom safe to use with itunes 8.2 and the new update 3.0 for the ipod touch 2G?

     

  • At July 2, 2009 1:54 AM , Blogger Max said...

    Hi im new here but i know a thing or two about mobile hack stuff (i was dealing with SE and Nokia). The thing is.. in QF on Step 2 (Create Custom FW). There is "Allready Jailbroken" and i dont know what it stands for.. is it for those who jailbroke their iPods before? (older FW) or does it mean that My Custom FW will be prejailbroken?

    Thx in advance

     

  • At July 3, 2009 12:17 PM , OpenID hockeykingmark said...

    Ive gotten everything so far up to where i need to press pre jail break. I think i put my ipod into DFU mode because my itunes needs to restore my ipod but on Quickfreedom it wont reconize my ipod. What should i do?
    Thanks

     

  • At July 5, 2009 2:28 AM , Blogger jerchouinard said...

    Hi my name is Jeremie,

    Im trying to installe Original 2.2.1 Firmware but when I finish installing the END of the NAME finishes by .Zip instead of .Ipsw what should I do to fix this reply as soon as possible plz ... my Email is Jerchouinard@hotmail.com

     

  • At July 5, 2009 5:02 PM , Blogger Kody said...

    I don't have the pre- jailbreak page, please help- thanks

     

  • At July 5, 2009 7:30 PM , Blogger Carter said...

    does it work with itunes 8.2?

     

  • At July 6, 2009 7:51 AM , Blogger thewilsons said...

    Hi..
    I`m doing everything right.. but i am getting error 13 and i dontknow what to do next ;(
    Pls help me !
    I`am trying and trying but no result. Sorry for my bad english ;(

     

  • At July 9, 2009 5:53 PM , Blogger Cory said...

    i intalled libusb in step one, and after some trouble i got the 2.2.1 firmware installed correctly. it said "you meet all the requirements, press next to continue"
    i pressed next and clicked "create firmware". after about 10-15 seconds it stops and a popup says "error creating firmware!" and nothing happens. please help

     

  • At July 10, 2009 10:38 PM , Blogger dv90 said...

    wtf i've tried this over 9000 times now.

    I open quickfreedom up in Admin mode and load the 3.0 7A341 firmware. and it says "Unable to accept firmware..."

    wtf is wrong with this??? please help

     

  • At July 18, 2009 7:14 PM , OpenID cjlenn12 said...

    I think all you idiots should read the instructions.

    It's very simple.

     

  • At July 25, 2009 9:56 PM , Blogger roberto.guzman64 said...

    i used quick freedom and it works great but the battery life of my ipod dies in 4 hours and it also over heats when im charging it i don't know if quickfreedom is its problem

     

  • At July 26, 2009 9:46 PM , OpenID masterheejoon said...

    hey guys.
    This jailbreak successfully installed... but
    when i open up installer... it says "Forbidden. You do no have permission to access /featured/ on this server." in the Featured tab.
    please help?
    its also the same for whats new.
    and i need installous

     

  • At August 3, 2009 10:25 PM , Blogger anthony said...

    will this work for 3.0.1

     

  • At August 4, 2009 3:22 AM , Blogger moepmoep said...

    After i connect the iPod in DFU mode, qf realizes so.
    pressing "Start Pre-Jailbreak" seems to work first, but then i get as follows:
    [time] Starting Pre Jailbreak. Please wait...
    [time] iPod connected in DFU mode, press Start Pre-Jailbreak
    [time] If your iPod screen is not white, try unplugging/replugging.
    [time] iPod connected in DFU mode, press Start Pre-Jailbreak

    now replugging does not do anything, if i cancel pre-jailbreak and start it again, its just the same, nothing else happens, ipod screen does not turn white. If i try to apply the custom firmware in itunes, it gives out an error (presumbly because pre-jailbreak was not successfull and the screen is not white).
    As far as i know i did follow the instructions exactly, but i wont get it to work. firmware is 2.2.1 while the ipod itself is a 1g (although that should not be a problem, as other people did get it to work with those), os is xp professional with sp2

     

  • At August 4, 2009 3:26 AM , Blogger moepmoep said...

    Oh, btw the "iPOD connected in DFU mode"-part appears after starting the pre-jailbreak and just seconds before the replugging message.

     

  • At August 4, 2009 10:23 AM , OpenID lamar10920 said...

    i have a problem every thing work well as far as jailbreakin the ipod but after i turned it on and looked around i opened safari and the internet wouldnt connect and i was in front of my wireless modem in the connection area when you go to settings it said connected bt when i go to itunes or safari or app store it said can not connect can someone help me

     

  • At August 5, 2009 12:56 AM , Blogger joemac said...

    HI
    Once jailbroken I can't find cydia or installer on my ipod

     

  • At August 8, 2009 11:17 PM , Blogger boarder3922 said...

    Hi, when I try to install the LIBUSB driver thing it says it won't allow because it's not digitally signed...

     

  • At August 20, 2009 6:28 AM , Blogger Chris said...

    Hi. I am new to the iTouch. I just bought a 2nd gen, and I want to be able to write software for it. It looks like the easiest way to get started is to install the 'toolchain 2.0' Cydia app and develop right on the device. This seems to only work with 2.2.1--there's not yet an 'easy-to-install toolchain for 3.0.
    My question is, am I missing something? Is backing up to 2.2.1 (I'm at 3.0) in order to use the 2.0 toolchain a reasonable thing to do? Maybe I should be in a developers forum...
    Thanks for any thoughts.

     

  • At August 27, 2009 2:23 AM , Blogger Psonnyc said...

    i jailbroke my ipod with this wonderful quickfreedom, worked great until now, after jailbreaking it with u guys it won't turn on, won't charge, can't plug into computer, say's the usb has malfunctioned and bought new usb same thing, i really want help, if anyone could help me any way i'd appreciate it.

     

  • At September 6, 2009 7:26 AM , Blogger Charlie said...

    I can't find the .ipsw file in the original firmware.

     

  • At September 7, 2009 4:52 AM , Blogger gip213 said...

    CYDIA AND INSTALLER ARE MISSING!

     

  • At September 15, 2009 12:41 AM , Blogger Luis Enrique said...

    It,s a s.h.i.t it fucked almost all of the drivers from my computer including the network adapter

     

  • At November 2, 2009 10:10 AM , Blogger Simon said...

    Approximatley how long time does it take to make the file?
    I am using a crappy computer with vista :(

     

  • At November 30, 2009 2:55 PM , Blogger Timo said...

    I don't get a conection with QuickFreedom to my iPod. But I have installed the LibUSB correctly!
    (with compatiblity mode for windows xp sp2)
    My operating system is win7, is this the problem?

     

  • At January 16, 2010 6:20 PM , Blogger zach_scoots said...

    i cant get my screen to turn white

     

  • At February 6, 2010 6:28 PM , OpenID djcangris said...

    hola yo tengo un ipod touch la version del mio es 3.1.3(7e18) en la pag de ustede no esta esa version
    donde yo puedo bajar esta version mi correo es alexbest156@hotmail.com espero su mensajer por favor mandame un mensaje ok gracia

     

  • At February 11, 2010 2:22 PM , Blogger Roberts said...

    Damn.. I installed it.. and USB didnt work.. okey One good man gave me PS2 keyboard.. now i want to do it right.. but i dont know is it safe?
    http://bildites.lv/images/sipzf09fq2fiih62bj5y.png
    There is the tutorial.. and there is Real.. Right - real.. Left Tutorial..
    I`m from latvia and my Windows is Latvian.. but where i can do that what`s in tutorial???
    PLEASE HELP!!!!!!!!!!!!!!!!!!!!

     

Post a Comment

<< Home