QuickFreedom

Untether Jailbreak your iPod Touch 2G!!

Wednesday, July 1, 2009

QuickFreedom 2.0 BETA

The Beta has been released! Please test it out and comment here or email me at dan@ipod2g.info for imporvments, ideas, bugs, etc. I have not tested iPod 1G, iPhone or iPhone 3G. Make sure you have upgraded to the 3.0 firmware before using QuickFreedom 2.0 Beta. Remember this is a Beta and custom ipsw creation, boot logo changing, etc are not available until a later date. Thank you for using QuickFreedom!

Note: This is just a Beta and full ipsw creation is not yet available, it this Beta does not work, please wait until QuickFreedom is updated with custom firmware creation.

If you get path error, try running QuickFreedom as an Admin.

posted by Dan @ 12:58 AM  

69 Comments:

  • At July 1, 2009 1:36 AM , Blogger mklem3 said...

    im getting stuck at the DFU mode, i try and put it into dfu (well i think i am) but it doesnt continue the jailbreak

     

  • At July 1, 2009 1:38 AM , Blogger Dan said...

    Go To Program Filex\QuickFreedom 2.0\redsn0w\

    Find Output.log and tell me what it says.

     

  • At July 1, 2009 1:56 AM , Blogger mklem3 said...

    redsn0w v0.6
    implementation (c) 2009 iPhone Dev Team
    iPhone 2G/iPhone 3G/iPod touch 1g:
    vulnerability and exploit: iPhone Dev Team
    iPod touch 2g:
    vulnerability: pod2g, MuscleNerd
    exploit: planetbeing, CPICH, posixninja, chronic



    DFU MODE SUCCESSFUL
    ------------------
    Connecting to server [....]

     

  • At July 1, 2009 2:00 AM , Blogger Dan said...

    What version of windows? Do you have an internet connection? Run the program as an admin.

     

  • At July 1, 2009 2:02 AM , Blogger mklem3 said...

    im running windows xp 32bit and it did the same for redsn0w i was hoping this would work but obviously its not, ill try running as admin

     

  • At July 1, 2009 2:12 AM , Blogger mklem3 said...

    when do you think it will be able to create the custom firmwares, or is it not possible

     

  • At July 1, 2009 2:26 AM , Blogger Dan said...

    Yes but you will have to wait until it is released.

     

  • At July 1, 2009 2:31 AM , Blogger mklem3 said...

    ok no problem, i guess ill just go back to 2.2.1, thanks anyway

     

  • At July 1, 2009 9:02 AM , Blogger Owen said...

    when will the non beta version be released??

     

  • At July 1, 2009 9:32 AM , Blogger iferlive said...

    Thanks Dan I'm going to trt it right now in my ipt2g :)

     

  • At July 1, 2009 12:17 PM , Blogger iferlive said...

    Hey Dan I have tried this new quickfreedom and it worked, still being easy to use and has a great GUI, now cydia doesn't crash like in redsn0w's jailbreak, everything worked perfectly thaks a lot.

    Just a quick questions: Does the final version of quickfreedom can create custom .ipsw? and when you think it will be released?

    Quickfreedom = Best Jailbreak Tool

     

  • At July 1, 2009 2:03 PM , OpenID chaosshroom135 said...

    if we use the beta, can we just add the custom stuff without uninstalling the beta firmware?

     

  • At July 1, 2009 2:29 PM , OpenID chaosshroom135 said...

    also, i get an error when i launch the jailbreak and i cant manually find the ipod's software. the folder that quickfreedom find the software in doesnt exist!! any where where i can download the actual .ipsw only?

     

  • At July 1, 2009 4:08 PM , Blogger iferlive said...

    Run quickfreedom with admin privileges and should run fine, if you don't have the firmware just download it from here http://www.felixbruns.de/iPod/firmware/

    Good luck man

     

  • At July 1, 2009 5:29 PM , Blogger gene said...

    Great tool easy to used worked on the first try on my ITouch. Thank you for your program.

     

  • At July 1, 2009 5:32 PM , Blogger gene said...

    Used your program on the first try it worked. Thank so much for this tool.

     

  • At July 2, 2009 4:58 AM , Blogger Saad Asad said...

    quick freedom says now jailbreaking please wait my ipod has black screen nothing except not even downloading jailbreak data or anything can u tell me whats the problem same thing happened to me when itried jailbreaking with redsnow
    plz help ipod touch 2g user with service pack windows xp plz plz help dan

     

  • At July 2, 2009 6:49 AM , Blogger mklem3 said...

    sounds exactly like my problem, running everything the same as you aswell

     

  • At July 2, 2009 8:41 AM , Blogger Alberto said...

    I jailbreak my ipod touch 2g is work fine.the only problem was it said error when it started it just run it on admin and it work fine.

     

  • At July 2, 2009 8:51 AM , Blogger mklem3 said...

    ive tried, still doesnt work

     

  • At July 2, 2009 11:43 AM , Blogger iferlive said...

    hey guys this is beta and has to have some bugs, the first time I used redsn0w for 3.0 firm I got the same error that you have, here is the solution that I found: just run quickfreedom as an admin (if you are on win-vista) and use another 3.0 .ipsw and place it in a diferent folder and that's it, after that should be working fine, make sure you know how to put you ipod into dfu mode ok.

    Good luck

     

  • At July 2, 2009 9:12 PM , OpenID unwantedsoulz02 said...

    Dan, do u have an estimated date on when the non-beta version is coming out?

     

  • At July 2, 2009 9:26 PM , OpenID zzbar4 said...

    this worked perfectly, thank you so much.
    except i have one problem. i don't know if you can help me with it, but it's worth a try. After i jailbroke, i went into cydia and tried installing things like winterboard, categories, intallous and others. But after they downloaded and installed, they didn't show up on the springboard. I don't know if you've ever heard of this or can help at all, but any help would be greatly appreciated

     

  • At July 2, 2009 10:40 PM , Blogger Jae said...

    Yeah I've heard of it it is just not showing go to sb setting then check which icons/apps are showing or not that happens sometimes but not often

     

  • At July 3, 2009 12:10 PM , OpenID grindcoreman said...

    runtime error: 75

    path/file access error

    any suggestions?

     

  • At July 3, 2009 12:10 PM , Blogger loadwire said...

    W00t w00t!!!

     

  • At July 4, 2009 4:38 AM , Blogger k1000 said...

    I'm having a lot of trouble trying to get my iPod touch 2G in DFU mode.

    I try to follow the instructions the way it says to, but when it says that i have to hold the power button down for 3 seconds, i do that but it always turns on again, so i have to keep turning it off again to re-attempt DFU.

    Is there an easier way of getting it into DFU mode or is that the only available option

    Thanks for your help Dan

     

  • At July 4, 2009 5:44 AM , Blogger Saad Asad said...

    Just keep hold both button apple boot logo will automatically go no problem happens to everyone when you see apple logo is gone then leave the power but keep holding the home button

     

  • At July 4, 2009 10:56 AM , Blogger k1000 said...

    Thanks for your advice as well Saad Asad, but it still will not go into DFU mode. I've tried endlessly to get it to work, but it just starts up normally instead of going into DFU mode.

    I had no trouble when i jailbroke it for 2.2.1, but it's too difficult this time. There must be a more easier way to get it in DFU mode

     

  • At July 5, 2009 6:59 AM , Blogger jonas.flach said...

    hey,
    step 1: firmware location
    should i look for the original firmware or for one i should download in the internet?
    Thanks
    Jonas

     

  • At July 5, 2009 7:01 AM , Blogger jonas.flach said...

    and where can I find the original firmware?
    thanks
    jonas

     

  • At July 6, 2009 1:20 PM , Blogger loadwire said...

    works perfectly on my winxp virtual machine on my mac

     

  • At July 6, 2009 1:20 PM , Blogger loadwire said...

    yay

     

  • At July 6, 2009 6:25 PM , Blogger Juan said...

    Will this work for Windows Vista x64 Bit? Because the other QuickFreedom I had to Run Compatibility Mode for Windows XP SP2. Do I have to do this for this QuickFreedom or will it work on Windows Vista x64 Bit?

     

  • At July 7, 2009 3:57 AM , OpenID mohish23 said...

    Hi dan i have upgraded to 3.0 and used your jailbreak but there are ssome relly big problems

    When i upgraded i got all these pages blank icons and its says they are bookmarks and when i delete them they com bak.

    I downloaded beejive instant messaging from appulos and it doesnt work anymore.

    My battery goes flat even when i fully charge it and dont use it.

    I would apperciate if u can fix these problems and relese quickfreedom 2.0 the full version

    Thank You

     

  • At July 7, 2009 4:01 AM , OpenID mohish23 said...

    And there is another problem the keyboard theme cannot be changed by winterboard

     

  • At July 7, 2009 10:01 AM , Blogger Adam said...

    Any idea when custom boot logo's will be available?

     

  • At July 9, 2009 2:06 AM , Blogger Thomas said...

    Works Great it wont work unless connected to internet....

     

  • At July 9, 2009 2:07 AM , Blogger Thomas said...

    Works great! just had to connect to the internet!

     

  • At July 9, 2009 12:32 PM , Blogger Andrew said...

    Thanks guys... You are genius!
    I can't wait till the final release...
    Any date ideas?

    Thanks

     

  • At July 9, 2009 1:09 PM , Blogger Andrew said...

    Will the final be untethered...
    If not could you make it untethered please...
    It makes everyone's lives so much easier!

    Thanks

     

  • At July 18, 2009 5:11 AM , Blogger Brendan said...

    How big will the final version make the system partition?

     

  • At July 20, 2009 3:30 PM , Blogger Jaythan said...

    cydia keeps crashing over and over again after like 15 secs. anyone have any suggestions?

     

  • At July 21, 2009 12:57 AM , Blogger Anthony said...

    currently, the beta is bricking my ipod, to where i have to restore my ipod

     

  • At July 22, 2009 10:04 PM , Blogger Bunny said...

    Is this an untethered jailbreak? Currently I have a jailbroken 2G which I did with redsn0w, which is fine but it's kinda annoying not ever being able to turn it off completely. And, any expected release date for the full version of this?

    Thanks :)

     

  • At July 23, 2009 1:37 AM , Blogger Anthony said...

    yes, i would love a release date
    lol

    keep all devices on this quickfreedom, i may be getting an iphone soon

     

  • At July 27, 2009 3:48 AM , Blogger Mohish23 said...

    I dont think dans gonna make a full version any more. he doesnt even reply to comments. I think redsnow is better then the beta of quick freedom.

     

  • At July 27, 2009 12:54 PM , Blogger John said...

    to the people having trouble at dfu mode: first, ive found it's easier to install icy and cydia, it's the only way ive succeded, also, after the box closes, hold home untill quickfreedom gets to about 5%, then it will have flashed white about 3 times

     

  • At August 6, 2009 5:23 PM , Blogger Psonnyc said...

    i really need help if there's anyway you can help me please do. my ipod touch has stopped turning on, completly, doesn't do anything. and when i plug into my computer to reinstall the computer can't recognise the usb! i hadn't yet done the new 3.0 update. But i'll tell you one thing, i do not wanna loose my ipod touch

     

  • At August 7, 2009 11:27 AM , OpenID lamboman94 said...

    okay when are you going to make a non beta version?!?!?!?!!? you said it would be soon and ive waited for more than a month for it!! please hurry up i really want it. and can u also make it so you can change the theme for the keyboard?? and also make it untethered!!

     

  • At August 8, 2009 7:18 PM , Blogger Jado777 said...

    hey, im having trouble here. Im trying to jailbreak my ipod touch 2g running 3.0. so i put it in dfu mode. i start the jailbreak, but then somewhere around 78%, my ipod turns back on. and the jailbreak stops, help please?

     

  • At August 10, 2009 1:34 AM , Blogger Brian said...

    any chance you are going to come out with the 3.0.1? I really like this program. less confusing than the long way and I don't have to second guess anything. I hope you stay around for the future updates!

     

  • At August 12, 2009 5:21 AM , Blogger Tim-Fiscus said...

    i tried to jail break and it said run-time error 75 file path blocked can u help me plz

     

  • At August 15, 2009 1:10 PM , Blogger Mauricio said...

    This post has been removed by the author.

     

  • At August 17, 2009 12:32 PM , Blogger Awsomebdg said...

    Will there ever be a non-beta version?

     

  • At August 17, 2009 12:59 PM , OpenID Chaosshroom135 said...

    HAPPY PERSON, JUST ADD FULL CUSTIMIZING PRIVLIGES!!!

     

  • At August 18, 2009 12:31 AM , Blogger Fred said...

    I can't even get past step 1. It says unable to accept firmware. Not sure why it won't accept it. I've downloaded the one from Apple and various other websites and it won't take it.

    I'm running Vista and in compatibility mode as administrator.

     

  • At August 19, 2009 10:55 AM , OpenID hybridtheory849 said...

    Hey Dan, is your next QuickFreedom release going to use redsn0w 0.8 or 0.7?

    I hear redsn0w 0.8 will need to choose a 3.0 IPSW for 3.0.1

     

  • At August 20, 2009 1:04 AM , Blogger surfers_SVROC said...

    any1 no when the non beta version will be out

    just an estimated date would be awesome thnx

     

  • At August 21, 2009 10:23 AM , Blogger Matt said...

    This is the best ive used and ive used all of them. I didnt even have to re-sync my music or lose any apps. Well Done daN

     

  • At August 21, 2009 7:25 PM , Blogger Waddle50008 said...

    It seemed to work perfectly until after it said it was finished jailbreaking. I was running on 2.2.1 firmware and upgraded to 3.0, then I used QuickFreedom 2.0 to jailbreak it, but it shows my device is in recovery mode after it's been supposedly jailbroken.

     

  • At August 24, 2009 5:26 AM , Blogger surfers_SVROC said...

    when will the non-beta version be released cause after i jailbreak it all is OK and works fine but then i respring it after installing things and my screen goes blank. i have tried everything. can someone help me plz!!!!!!!!!!!!!!!!!!!!!!!!

     

  • At August 25, 2009 2:37 AM , Blogger surfers_SVROC said...

    hey dan cmon every one is asking i so want to jailbreak 3.0 and i need a reelease date for the non-beta version i mean i even sent you a dam email and that was months ago.

    i want to use this program because i have used it before and it was sooooooo easy, cmon dont let all your users down all we ask is a simple date...........

     

  • At August 27, 2009 7:28 PM , Blogger Am0795 said...

    Hey dan, i love the program and thanks... but when im in the dfu part it says run-time error 75
    Path/file access error

    Can u or anyone help?

    Dark Asagrd

     

  • At August 29, 2009 8:58 PM , Blogger Mariel said...

    When I want to start creating the firmware it gets stuck in 1% plz help!

     

  • At August 31, 2009 8:09 PM , Blogger RJ said...

    i jailbroke my ipod but then went to download the software again to jailbreak my friends ipod the link doesnt work!!!!!!!!! i Restored it and deleted everything off it for NO REASON

     

  • At October 3, 2009 8:15 PM , Blogger meg200 said...

    how can i find the firemare

     

  • At October 4, 2009 9:11 PM , OpenID xembabeh said...

    is this for untethered.. or..?

     

  • At January 5, 2010 10:21 PM , Blogger helllo said...

    I have logged into admin and still wont let me download the custom firmware

     

Post a Comment

<< Home